Multi Layer Insulation Films
MLI Insulation Functional Environment
Today's spacecrafts see a multitude of temperature fluctuations that can range from lows of -100°C to highs of +150°C (-150°F to +300°F), depending the spacecraft's orbit. This can be Low Earth Orbit (LEO), Geosynchronous Earth Orbit (GEO), Synchronous or Interplanetary Orbit.
Orbiting in the shade of earth or the spacecraft's own shadow can pose a challenge in keeping the vessel stable in the rigors of space. The craft can swing quickly to the cold side (typically -125°C / -195°F) when in the shadows. Alternatively, the spacecraft can see extremely high temperatures, typically +150°C (+300°F), when exposed to the sun. Furthermore, there is a substantial amount of heat generated from the spacecraft's onboard equipment. Therefore, the spacecraft material must be highly adaptive to protect from both extreme heat and cold. Multi layer insulation blankets (also known as MLI insulation) are ideal to protect the delicate instrumentation in these extreme conditions.
Multi Layer Insulation Design Considerations
Multi layer insulation materials consist of lightweight reflective films assembled in many thin layers. These layers are typically made of polyimide and/or polyester films (according to design, could be from 5 to 30 layers) that are vapor deposited with 99.99% aluminum, on one or both sides. The multilayer films assist in the material's heat management by reducing emittance with each layer.
As it is very difficult to design an MLI insulation blanket that reflects 100% of incident radiation, a multilayer film design can range from a few simple layers to a complex array of blankets that completely surround the spacecraft and many of its external components. The designs of these layers typically reflect 95% of radiation back away from the Spacecraft. The total effect by the time the radiation energy makes its way to the innermost layers is, effectively, a 100% reflective barrier.
Multi Layer Insulation Maintains Operational Temperatures
Ideally, temperatures which are most desired for a spacecraft to operate at maximum capacity is between -23°C to +40°C (-70°F to +107°F). This is accomplished by using MLI insulation materials that will work for both active as well as passive systems. Active systems can be best described as energy sources such as battery powered heaters, which work to keep the spacecraft at nominal temperatures (+70°F) during cold cycles. Passive systems are best described as using engineered materials, as are found in MLI blankets and offer radiation heat barriers to retard and control the flow of energy.
MLI Insulation Critical Factors
The terms absorption and emittance are two critical factors in the design and effectiveness of a multi layer insulation system. Absorptance is a material's ability to reflect solar energy. Typically, a material that has low solar absorptance will have high reflective properties, such as a mirror that deflects heat (solar energy) away from the spacecraft. Depending on the requirements, various levels of solar absorptance can be achieved. DUNMORE's multilayer insulation films are specifically designed for these applications. Vacuum Deposited Aluminum (VDA) is the most commonly used coating as it offers low absorptance and emittance properties at an affordable cost. Emittance is a material's ability to radiate energy in the form of heat. Similar to a hot coal, once the energy source (in this instance - fire) is removed, the coal continues to emit heat. MLI insulation materials with high emittance will radiate heat long after the Spacecraft is out of the sun's exposure. By design, both Absorptance and Emittance properties can be configured to control the temperature of the spacecraft surfaces.
Multilayer Film Applications
DUNMORE multilayer films, with engineered absorptance and emittance properties, are used in the manufacture of MLI insulation blankets for passive thermal control systems. These blankets are used for many applications on the spacecraft, such as structural members, instrumentation, antennas, radiators, wiring harnesses and sunshield covers. DUNMORE multi later films have been part of nearly all space programs worldwide since the mid 80's and is widely used in US and European launch vehicles both government and privately operated.
DUNMORE Corporation is required to maintain documentation for select materials that are exported for aerospace use in order to comply with the US State Department International Traffic in Arms Regulations (ITAR). For products that are classified under ITAR, DUNMORE requires additional steps to collect program/project specifics in order to provide datasheets and/or other technical product information.
Contact Us for Multi Layer Insulation Films for Aerospace
Please Contact Us to find out more about using multi layer insulation films and tapes for the manufacture of your MLI insulation systems.